The Winkhaus FGTE Slave Door Lock is designed for fitting to the second opening leaf of double doors as part of a full FGTE twin handle system. Top and bottom shootbolts (supplied separately) are fitted to the lock to provide locking points at the head and cill. The slave lock faceplate has adjustable apertures to accept the corresponding bolts of the Cobra or Thunderbolt lock on the master door.
Supplied here in lock only format excluding shootbolts. Shootbolts can be purchased via the relevant product link in the "Related Items" section below.
This lock is handed Left Hand or Right Hand and care must be taken to specify the correct hand when ordering.
For optimum security this lock should be fitted with TS 007 3 Star cylinders (see our ULTION Maximum Security range) or TS 007 1 Star cylinders with 2 Star cylinder guard (see our Adapta Prime High Security range). We recommend master and slave door cylinders are Keyed Alike.
Lever handle furniture MUST be of a type that allows the handle to be lifted. Handle backplates should be compatible with the lock centres measurement and fixing centres measurements. Please refer to the relevant technical drawings.
One Winkhaus FGTE Slave Door Lock only as described. Shootbolts and keeps should be ordered separately if required.
This multipoint lock is stocked in quantities normally sufficient to fulfill most orders for immediate despatch. Where we are temporarily out of stock you should allow approximately 10 - 14 working days for despatch. Please contact us if you would like to know the stock situation prior to placing your order.
